Where grounding of some equipment or parts of equipment through traditional earthing techniques is impractical, where it is impossible to exclude all charging materials from the area, the use of suitable ionizers is highly recommended. Air ionization systems work by flooding the atmosphere with positive and negative ions.
When the ionizated air comes in contact with a charged surface, the surface attracts ions of the opposite polarity. As a result the static electricity that has built up on products and equipment is neutralized.
Ions do remove small particles or smoke and pollens from the air, and subjective research suggest that people working in ionized area are happier.
The generated ozone is lower than 0.005ppm after 24 hours accumulation, conform to OSHA requirements.
|
|
|
6422/e Point of use ionizing blower
The smallest and most versatile blower available for equipment or local area ionization. It is ideal for use inside or on top of production equipment. Battery operated model is very useful on field service call.
Discharge time: from 1000V to 100V < 10s at 60cm
Emitter points: tungsten alloy, internally shielded, 5 years life
Air flow: 15m^3/h
Power requirement: 24Vac 5W
Dimensions: 11.4×8.4×5.1cm
9265.560 Point-of-use ionizing blower, 24Vdc
9265.577 Wall transformer 230/24Vdc 32W |
|
|
6432/e Local area ionizing blower
Controls static discharge in mid-sized areas, it is indicated for general workbenches applications, conveyors, equipment.
Discharge time: from 1000V to 100V < 7s at 60cm
Emitter points: tungsten alloy, internally shielded, 5 years life
Air flow: 80m^3/h
Coverage area: 122x46cm
Power requirement: 24Vac 50-60Hz
9265.576 Local area ionizing blower 24Vac 6W transformer 230Vac/24Vac included |
|
|
Local Area Ionizing Blower AEROSTAT PC2
High performance compact ionizing blower, features an adjustable air flow speed and integrated heater. Suitable for workbenches, conveyors, robotics, packaging.
Decay time: from 1000V to 100V < 2s at 60cm
Emitter points: patented emitter point cleaner
Air flow: 220m^3/h at high speed
Coverage area: 150x30cm
Power requirement: 230Vac 50-60Hz
Auto-balance: 0±10 V
9265.582 Local Area Ionizing Blower AEROSTAT PC2, 230Vac |
|
|
Turbo ionizing blower XC2
The Turbo Blower is designed to achieve full control in any environment, it is ideal to cover large areas.
The fan can work at 3 different speed and has heater incorporated to grant a good comfort (heater can be turned on or off). Easy cleaning of the emitters using the button “Emitter Clear Button”. The decay time is minimum due to the high performance of this ionizer.
Discharge time: from 1000V to 100V < 2.5s at 60cm
Emitter points:“Emitter Clear Button”
Air flow: 250m^3/h at high speed
Power requirement: 230Vac 50-60Hz
Auto-balance: 0±10 V
9265.602 Turbo Ionizing Blower XC2, 230V |
|
|
Overhead ionizing blower GUARDIAN
It is a 3 fan smart ionizer that provides reliable, adaptable performance in the most static-sensitive environment. Designed for mounting over the benches, conveyors, it allows a complete 3D neutralization of the static charges, without compromising space over the table, and in the most comfortable environment. Equipped with 3 fan, adjustable air flow, heater, 13W twin tube fluorescent light, and emitter cleaning system.
Decay time: 1±1000V to 100V < 6s at 45cm
Emitter: Patented emitter point cleaner
Air flow: 500m^3/h at high speed
Coverage area: 120x60cm
Power requirement: 230Vac 50-60Hz
Auto-balance: 0±5 V
9265.610 Overhead Ionizing Blower GUARDIAN, 230V |
|
|
CR2000 overhead ionizer for clean room
This ionizer has been designed specifically for critical clean room environment, up to Class 10. It is powerful and efficent with a minimum decay time. It is normally used suspended over the benches, conveyors and assembling areas. Equipped with 3 fan, adjustable air flow, heater, and emitter cleaning system. Available in 2 version, with 2 or 3 fan.
Decay time: 1±1000V to 100V < 3s at 45cm
Emitter: Patented emitter point cleaner
Air flow: 450 m^3/h at high speed for the 3 fan / 300 m^3/h for the 2 fan
Coverage area: 120x60cm for the 3 fan version / 90x60cm for the 2 fan
Power requirement: 230Vac 50-60Hz
Auto-balance: 0±5 V
Clean room: Compatible with class 10
9265.620 CR2000 overhead ionizing blower for clean room, 2 Fan, 230V, length 81cm
9265.622 CR2000 overhead ionizing blower for clean room, 3 Fan, 230V, length 109cm
|
|
|
6115 Air force blow-off gun
Usable also in clean room, ergonomically designed, light, it is used to blow off charged dust particles from electronics cards and other equipment or materials.
Gun: ergonomic, low noise, weight 340g
Discharge time: from 1000V to 100V < 0,5s at 6″, 30psi
Emitter points: machined titanium, field replaceable
Gas input: 20-87 psi (1.4-6bar), clean dry air or nitrogen
Ozone: < 0.005ppm (24 hour accumulation)
Noise: 70dBA at 1m, 30psi
Power requirement: 24Vac, 10W
9265.530 Complete kit including hand unit, console, air filter and transformer 220/24Vac
9265.532 Additional filter pack (pack of 3) – 0.1μm 99,99% EFF |
|
|
Heavy duty TOP GUN
Designed for heavy duty jobs, due to its high performance, reliability and durability.
There is a flow control valve to adjust airflows for the specific application.
It is completely ESD and can be used even in clean rooms.
The version with sidekick allows “hands free” operation.
Discharge time: from 1000V to 100V < 0,5s at 5cm, 60psi
Air input: adjustable to 100 psi (7 bar) max.
Noise: 76dBA at 60cm, 30psi
Power requirement: 230Vac
9265.520 Ionizing Gun TOP-GUN, 230Vac
9265.523 Ionizing Gun TOP-GUN with flexible support and sidekick (foot pedal switch), 230Vac |
|
|
6110A Air cartridge
The cartridge can be used either for in-line ionization or as ionizing blow-off gun, adapts to compressed air lines. Two models available, one turns off ionizer when air is not flowing.
Weight: 170g
Power requirement: 24Vac, 50-60Hz
9265.542 Ionizing catridge, air flow triggered, 24Vac
9265.544 Transformer 220/24Vac |
|
|
– low decay time
– reduced airflow
– clean room compatible
– balanced
– IEC 61340-5-1 |