Vacuum Heat Sealers (with tank)

Products > Heat sealers
Vacuum tank sealers VACUWELD with oil pump
The VACUWELD machines have been designed to avoid electrostatic charges, for the use in ESD environments: stainless steel chamber, aluminium cover and conductive wheels.
The use of an oil pump let the sealer to reach a high vacuum level (98% measured at the sea level).
Very accurate adjustment of vacuum, controlled by an internal sensor.

Seal bar: 450x5mm
Useful chamber size: 450x500x90(H)mm
Vacuum pump: Oil bath 20 m³/h
Power supply: 220V/50Hz 2Kw


7914.278 Vacuum tank sealer
7914.278
Vacuum tank sealer with inert gas injection (nitrogen) 


Vacuum tank sealers VACUWELD with venturi pump
Clean room compatible machine, stainless steel chamber, designed to package trays, tubes, tapes and reels. The use of a compressed air-driven vacuum pump minimize noise, vibration and heat generation.Very accurate adjustment of vacuum, controlled by an internal sensor.

7914.275 Vacuum tank sealer – Seal bar: 460x10mm – Useful chamber size: 500x600x100(H)mm – Air requirements: 6 Nl/s at 6ATM – Power supply: 220V/50Hz 1Kw


Vacuum tank sealers table models
Vacuum tank sealers are professional and automatically operated models, with degree of vacuum set on the front panel by the operator.
All vacuum tank models are available with an optional “Inert Gas Injection”.
All models have a diffusion Oil Bath Pump.
All table models have a stainless stell construction.

7914.262 Vacuum tank sealer – Seal length: 400x5mm – Vacuum pump: Oil bath 20 m³/h – Chamber capacity: 410x400x90mm
7914.263 Vacuum tank sealer – Seal length: 450x5mm – Vacuum pump: Oil bath 20 m³/h – Chamber capacity: 460x450x90mm

The third dimensions in chambers capacity refers to the useful height at the centre of the chamber.