Wire Shelving And Carts

Products > Trolleys and shelving

Wire shelving
Solid CONDUCTIVE shelving, in chrome plated steel, resistant to rust, bumps and scratches.
This system allows an efficient air circulation, a good light penetration and the maximum accessibility.
Easy to assembly on field, it doesn’t require any screws, bolts or tools.
Split sleeve assembly device locks shelves in place in 1″ increments along height of post.
Levelling bolt compensate for uneven floors.
Every wire shelf system can be made mobil by using conductive castors. VINYLAB mat optional cover, 2 layers, grey ESD.

Load capacity for single shelf: 150Kg
Load capacity for shelving unit: 800Kg

The starter unit, the first one, is composed by two, three or four shelves by choice, and four posts. Every shelf needs four split sleeves to fix to the posts. An add-on unit to be attached to the preceding, needs two posts only. This unit connect to the starter unit by mean of S hooks, two for shelf, easy to fix. In this case two split sleeves for shelf will be enough (for a total of two S hooks and two split sleeves for shelf).

Shelf dim. (mm) Shelf
350×910 8103.990 8104.140
350×1220 8103.991 8104.141
455×910 8104.001 8104.142
455×1220 8104.002 8104.143
455×1525 8104.003 8104.144
455×1830 8104.000 8104.145
610×910 8104.004 8104.146
610×1220 8104.005 8104.147
610×1525 8104.006 8104.148
610×1830 8104.007 8104.149

8104.020: Post H=864mm
: Post H=1370mm
8104.022: Post H=1600mm
8104.023: Post H=1890mm

8104.050: S hook for add on unit
8104.060: Aluminium split sleeve (optional)
8104.061: Chromed plastic split sleeve (optional)

For the safe and tidy storage of SMD-reels, there are different wire shelves that can be combined in any order with any other wire shelves.
8104.012: SMD reel shelf 455 x 910mm. Reel capacity: 78, DIA.180mm x width. max.17mm
8104.013: SMD reel shelf 455 x 910mm. Reel capacity: 15, DIA.330mm x width. max.50mm

8104.101: Fixed label holder

8104.110: Shelf dividers L=455mm
8104.111: Shelf dividers L=610mm

: Ledge 100mm x 455mm
8104.131: Ledge 100mm x 610mm
8104.135: Ledge 100mm x 762mm

Wire carts
Two versions of it: with 2 U-handles or 4 posts.
The shelves are the same used in the shelving unit, easy to assembly with split sleeve devices to avoid any tools, screws and bolts.

8104.041: U-handle 455mm width, 876mm height
8104.042: U-handle 610mm width, 876mm height
8104.070: Set of 4 conductive castors diameter 125mm
: Set of 4 NON-ESD castors diameter 125mm
8104.046: Handle 455mm
8104.047: Handle 610mmLoad capacity: 200Kg